REVISED STANDARD SPECIFICATIONS FOR …
The asphalt emulsion contained in the distributor tank shall be homogenous. Emulsified asphalts held in storage tanks, drums, or distributors for long periods are subject to settlement. The asphalt emulsion shall be sufficiently agitated or circulated to ensure a homogenous emulsion prior to sampling or application.">

emulsified asphalt asphalt distributor identifier

Shanghai Doan Machinery Technology Co.,Ltd is a road repair machine manufacturing factory ,which is specialized in manufacturing Asphalt Distributor,Crack Router,Crack Sealing Machine,Chip Spreader,road roller,Asphalt Mixing Plant ,etc.
we own dozens of advanced production lines and advanced production technology and high quality professional management talents to ensure excellent product quality.

Our products include:

Terms:

1) Delivery term: FOB,CNF CIF

2) Delivery lead time: 30 days after receive T/T deposit.

3) Payment term: .30% as deposit by T/T, balance will be paid by T/T against the copy of B/L.

4) Quality assurance: Test Certificate is supplied with shipment, third Party Inspection is acceptable.

Our Advantage:

1.Operating radius is small, can work in a small area,suitable for groove backfill;
2.With HONDA gasoline engine or famous water-cooled diesel engine,superior performance,easy to operate;
3.With international famous brand PH hydrauulic drive unit,infinitely variable speed;
4.Hydraulic steering,reversing conveniently; Vibratory Road Roller
5.Internationally renowned NSK Bearings,MITSUBOSHI (Samsung) belt, to ensure the work performance of machine;

Inquiry Us Inquiry For More Information!Send Email To: [email protected]

REVISED STANDARD SPECIFICATIONS FOR …

The asphalt emulsion contained in the distributor tank shall be homogenous. Emulsified asphalts held in storage tanks, drums, or distributors for long periods are subject to settlement. The asphalt emulsion shall be sufficiently agitated or circulated to ensure a homogenous emulsion prior to sampling or application.

SAFETY DATA SHEET - Asphalt Supply | Paving …

Identification . Product identifier DISSCO ® CSS1h Emulsified Asphalt. Other means of identification Tack Coat, Asphalt Emulsion, Emulsified Asphalt . Recommended use . Used as a prime or tack coat under and/or around asphalt paving and patching. Recommended restrictions . Not known . Manufacturer/Importer/Supplier/Distributor information . Manufacturer

Chapter 4: Construction Details, Section 94: Asphaltic ...

Placing new hot mix asphalt over planed pavement. Contractor’s distributor truck shows up with SS1h (slow setting, grade 1) emulsion that has been diluted with 1 part water to 4 parts original emulsion (that is; 1:4, or an 80/20). The diluted emulsion is …

Asphalt Binder, Cutback Asphalts, and Emulsion …

manufacturers and distributors of asphalt modifiers, asphalt hot mix plant operators, job prime contractors, or others. ... ⦁ Laboratory number/identifier of the laboratory tests that are the basis of the ... for emulsified asphalt grades SS-1, SS-1h,

SECTION 8 CAPE SEALS USING ASPHALT EMULSIONS

8.8.1 Asphalt Emulsion Distributor The distributor used for applying asphalt emulsion for prime coat, tack coat and chip seal should consist of a fully insulated tank mounted on a truck or trailer propelled by a power unit capable of accurately maintaining the speed required for proper applica-tion rates.

Black-Topper CENTENNIAL Asphalt Distributor

create an environment within the Asphalt Distributor that can be corrosive to carbon steel and cast iron. • Cationic Emulsions are widely used within the industry. • Cationic Emulsion is manufactured with asphalt, water, emulsifiers and hydrochloric acid. The chemistry of individual emulsions varies in asphalt content and Ph levels.

Black-Topper CENTENNIAL Asphalt Distributor

create an environment within the Asphalt Distributor that can be corrosive to carbon steel and cast iron. • Cationic Emulsions are widely used within the industry. • Cationic Emulsion is manufactured with asphalt, water, emulsifiers and hydrochloric acid. The chemistry of individual emulsions varies in asphalt content and Ph levels.

Testing Report for 2021-09-08-16-1 - dime.dot.ca.gov

Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory . Sample Organization Contact: (916) ... Distributor . Laboratory sample identification ... Test Method: AASHTO T59-16: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7)) Verified Date: 09/23/2021 ...

Chapter 4: Construction Details, Section 94: Asphaltic ...

Sample asphaltic emulsion in accordance with Table 6-1.12, “Materials Acceptance Sampling and Testing Requirements: Seal Coats,” Table 6-1.13, “Materials Acceptance Sampling and Testing Requirements: Asphalt Concrete," and the instructions in Section 6-203C, “Materials Accepted on the Basis of a Certificate of Compliance,” of this manual.

REVISED STANDARD SPECIFICATIONS FOR SECTIONS …

The asphalt emulsion contained in the distributor tank shall be homogenous. Emulsified asphalts held in storage tanks, drums, or distributors for long periods are subject to settlement. The asphalt emulsion shall be sufficiently agitated or circulated to ensure a homogenous emulsion prior to sampling or application.

Section 427 Emulsified Asphalt Slurry Seal

Section 427—Emulsified Asphalt Slurry Seal 427.1 General Description This work includes placing slurry seal. Emulsified asphalt slurry seal is a thin application of a mixture of fine non-plastic aggregate, emulsified asphalt, mineral filler, and water. 427.1.01 Definitions General Provisions 101 through 150. 427.1.02 Related References

Asphalt Binder, Cutback Asphalts, and Emulsion …

manufacturers and distributors of asphalt modifiers, asphalt hot mix plant operators, job prime contractors, or others. ... ⦁ Laboratory number/identifier of the laboratory tests that are the basis of the ... for emulsified asphalt grades SS-1, SS-1h,

Emulsified Liquid Asphalt and Distributor Services (Group ...

Apr 06, 2016 · Emulsified Liquid Asphalt and Distributor Services (Group I Primary, Groups III and IV Secondary) From: Montgomery (County) View Official Site. Save Share. Start Date 06 Apr, 2016 (about 5 years ago) Due Date 05 Apr, 2022 (in 8 months) Opportunity Type Contract. Opportunity Identifier 1053516. Customer / Agency Department of Transportation ...

Construction Guide Specification for Emulsified Asphalt ...

A skirt can be attached to the asphalt distributor in the case winds are above 10 mph to prevent the emulsified asphalt from blowing onto passing vehicles. 410.5.2. Application Rate The emulsified asphalt application rate for the fog seal shall be between 0.015 gal/yd2 for dense

1203 - EMULSIFIED ASPHALT SECTION 1203 …

1203 - EMULSIFIED ASPHALT 1200 - 9 d. Modified Emulsions, RS-1HP, CRS-1HP and CSS-1HM and CSS-Special (1) Provide anionic emulsified asphalt (RS-1HP) that complies with TABLE 1203-1 or cationic emulsified asphalt (CRS-1HP or CSS-1HM) that complies with TABLE 1203-2. (2) Provide a modified emulsion that contains a minimum of 3.0 percent polymer …

Black-Topper CENTENNIAL Asphalt Distributor

create an environment within the Asphalt Distributor that can be corrosive to carbon steel and cast iron. • Cationic Emulsions are widely used within the industry. • Cationic Emulsion is manufactured with asphalt, water, emulsifiers and hydrochloric acid. The chemistry of individual emulsions varies in asphalt content and Ph levels.

Michigan Paving & Materials Company - Asphalt …

polysorbate base is the most effective method to dissolve the solidified asphalt. Asphalt can also be slowly dissolved with vegetable oil, baby oil or mineral oil. General information HEALTH HAZARDS Emulsified asphalt is a dark brown to black liquid emulsion. This asphalt is fluid at 150-200 degrees F. This

SECTION 8 CAPE SEALS USING ASPHALT EMULSIONS

8.8.1 Asphalt Emulsion Distributor The distributor used for applying asphalt emulsion for prime coat, tack coat and chip seal should consist of a fully insulated tank mounted on a truck or trailer propelled by a power unit capable of accurately maintaining the speed required for proper applica-tion rates.

Dust Control Using an Asphalt Emulsion - Iowa

and 2) for mixing and applying the dilute asphalt emulsion. Three-1000 gallon asphalt distributors (one Gunnison, one Etnyre and one Roscoe) normally used to apply MC-800 cutback asphalt were supplied. Each distributor was equipped with a propane heating system. An "inage" tank stick was available for each distributor. These

ALABAMA DEPARTMENT OF TRANSPORTATION

Anionic Emulsified Asphalts; and 275 °F – 350 °F {135 °C – 175 °C } for Performance Graded Asphalt Binders. The NTSS-1HM asphalt emulsion shall be covered as soon as practical. An asphalt distributor shall be provided for use on all accessible areas; inaccessible areas such as around manholes, etc. may be coated by other approved methods.

**********************************************************

The distributor must be equipped to hand spray the emulsion in areas identified either on the plans or by the Contracting Officer. 1.3.3 Aggregate Spreader The asphalt distributor truck will be equipped with an aggregate spreader that can apply sand to the emulsion in a single pass operation without driving through wet emulsion.